SaR device – camera equipped FPV-ready payload dispenser
Get the best of two applications in one and deliver payload exactly where needed.
Adjust the camera manually to desired angle, ie. 90° to exactly see underneath the Splash Drone.
Attach the security gear to the payload release mechanism, fly out to planned location, watch the terrain in real time, or a person in water, and drop the payload on target.
- Take-off Weight：1KG
- Line length：340mm
- Sensor: PC7070 NTSC/PAL
- DC IN：12V(+/-10%)
Waterproof 4K Camera with 2 Axis Gimbal Module for Splash Drone 3
Waterproof 4K Camera Gimbal
1. Fully waterproof 4K camera, with integrated 2-axis gimbal provides you the unique ability to capture smooth and stable videos;
2. The new camera shoots 4K 25FPS video and 14 megapixel still photo;
3. Quick attach and release requires only a single screw;
4. With built-in Micro SD card reader;
5. IP67 waterproof level allows for filming underwater;
6. Only compatible with Splash Drone 3.
Works with the Splash Drone 2 if you use this adapter
TRAIN AND COMPETE
Drone Racing is about being the fastest and speed comes with training and competing. Timing systems are expensive, hard to set up and often unreliable. For the first time ever, the TBS RaceTracker in partnership with Drone Squad solves all those problems. Now FPV Pilots around the world can effortlessly measure their performance for training and competition.
With Universal Video RF sensing technology, it doesn't matter what FPV aircraft your are flying: Race Quad, Tiny Whoop or Wing, the TBS RaceTracker has you covered.
TBS will also offer a simple companion-app for the TBS RaceTracker that only does lap timing.
HOW IT WORKS
Just place the RaceTracker on the start gate, pair it to the app and go! There is nothing that needs to be added to your drone.
SMART & ACCURATE
The TBS RaceTracker is an innovation developed in partnership with german RF lap timing experts. Through intricate RF analysis it delivers transponderless milisecond accuracy lap times while ensuring compatibility amongst most video transmitters. The wide range of calibration features and default presets make sure that no lap time gets missed, ever! The bluetooth 4.0 (BLE) connection to your mobile device provides great range, the bright LED's on the RaceTracker allows your spotter to observe the status from far away. Thanks to a giant, 1S 3000mAh Li-Ion battery, the tracker can run for up to 6 hours and charges off a standard micro USB plug.
The included expansion port allows a host of extra features, to be added later. Firmware upgrades over the air through your smartphone app ensure that your RaceTracker is always up to date. It makes the TBS RaceTracker a safe investment into your FPV racing career, as it grows with you and only becomes more powerful over time!
COLOR + ANIMAL = AWESOMENESS!
Following the same formula as "BlackSheep", we have given each tracker a fully unique and individual Color + Animal nickname. This solution avoids confusion at the gates where we predict multiple trackers will be positioned in the near future :)
- Weight: 96g
- Dimensions: 96mm x 30mm x 35mm
- Accuracy: ~5ms
- Battery: 3.6V 3000mAh Li-Ion (18650 form factor)
- Operating time: up to 6 hours
- 5.8GHz timing: 5200MHz - 5999MHz
- Bluetooth: Bluetooth 4.0
- Mobile apps: Drone Squad & TBS Tracker
This FSV1104 bundle is a complete goggle kit with the HD monitor preinstalled into the Full Panel Viewer. In this configuration, the goggles enjoy the cost benefit of a single panel design but in a form and comfort factor closer to micro display type goggles. The patented folded optics allow both eyes to converge onto the single display in a viewer that is less than half the size of all previous single panel style headsets. A bottom mounted access panel can be opened to change the optics for different magnifications
The Fat Shark Transformer is a revolutionary new display system that can transform into three common FPV viewing devices; monitor, binocular goggles and single panel headset.
Mode 1: HD Diversity Monitor (FSV1101)
The heart of the system is a compact diversity monitor with a high luminosity HD LCD screen (FSV1102). The display can be tripod mounted or hand held for directly viewing wireless analog video (or HD sources via the HDMI port). It’s a great way to test FPV before committing to full immersion and a convenient way to follow the trackside action!
Mode 2: Immersive FPV Goggle (FSV1102)
Set your Transformer HD monitor (not included) into binocular mode and snap it into the binocular viewer to transform it into a massive 55 degree FOV goggle for mind blowing immersive flight! The viewer has adjustable focus and adjustable IPD (inter-pupillary distance) for unparalleled viewing comfort and adjust ability. For use with Transformer HD monitor in analog mode only (for HD resolution display, select full panel viewer).
Mode 3: Compact Single Panel Headset (FSV1103)
The Full Panel Viewer transforms the Transformer HD monitor (not included) into an HD goggle with the cost benefit of a single panel design but in a form and comfort factor closer to micro display type goggles. The patented folded optics allow both eyes to converge onto the single display in a viewer that is less than half the size of all previous single panel style headsets. A bottom mounted access panel can be opened to change the optics for different mag-nifications (sold separately).
– 720p HD LCD display
– High Luminosity (400 cd/m2)
– NTSC/PAL Auto Selecting
– High definition media interface 720p support
– 5G8 32ch antenna diversity receiver
– DCin: 7-13V (2S/3S)
– 500mA@7.4V(RF mode) /320mA@7.4V (AV mode)
– FOV 55°
– Adjustable IPD (55 – 76 mm)
– Adjustable focus (0 to -4 dpt)
– FOV 47°
– Fixed IPD (55 – 76mm)
– Interchangeable optics (sold separately)
The Fat Shark FSV1814 headset battery case is a way of holding two Li-Ion 18650 batteries (sold separately) to provide a 7.4V nominal voltage for use with existing FatShark goggles.
The case will fit into the standard head strap like the standard FatShark battery packs. This allows you to have a large battery capacity when used with high capacity cells (batteries not included). Batteries should be removed and charged via a dedicated 18650 style charger.
- Output Voltage:7.4v
- LED Indicator:Available
The highly requested M9 Gimbals with Hall Sensors for the Taranis radios are here!
The FrSky M9 Hall Sensor will not wear out quickly. It has an extremely smooth feel with the quad ball-bearings and the metal outer construction. Sold individually - two identical gimbals are required to upgrade your radio.
Supply Voltage (VCC): DC 3.0 ~ ±0.5V
Sensitivity: 2.50 mV/G
-Can be enable or disable self centering on both axis and ratcheting on the Y axis
-Special material quality that wears well
What's in the box:
1x Frsky M9-Gimbal M9 Sensitivity Sensor Gimbal